Great-plains 3P605NT Assembly Instructions Bedienungsanleitung PDF herunterladen

Great Plains Mfg., Inc.

Installation Instructions 1

6 Foot No-Till Drills

Grease Bank

Used with:

• 605NT

• 3P605NT

General Information

These instructions explain how to install the Grease Bank

kit on a drill originally purchased without one.

The 151-124A Grease Bank provides a single easily

accessible point for supplying lubricant to all 9 coulter

pivot assemblies. The kit includes all necessary compo-

nents except grease.

These instructions apply to:

Use this kit only with Great Plains model 605NT &

3P605NT drills. Kit hardware is sufﬁcient only for these

models. Do not modify the drill for use with attachments

other than Great Plains options and accessories speci-

ﬁed for use with the drill.

Figure 1

Installed Grease Bank

Before You Start

Inventory the kit contents per the “Parts List” on page 4.

Review the installation instructions in this manual, to

ensure that the steps are understood, and that the nec-

essary resources are at hand.

If necessary, move the drill to a suitable work location.

Lower the unit to the ground.

Have the following tools at hand:

• Basic hand tools

• Tubing cutter

• Grease gun and grease.

Deﬁnitions

The following terms are used throughout this manual.

Right-hand and left-hand as used in this manual are

determined by facing the direction the machine will travel

while in use.

IMPORTANT !

A crucial point of information related to the preceding

topic. Read and follow the directions to remain safe,

avoid serious damage to equipment and ensure de-

sired field results.

Note: Useful information related to the preceding topic.

en you see t

is sym

, t

e su

sequent instructions

and warnings are serious - follow without exception.

Your life and the lives of others depend on it!

151-124A 6’ Grease Bank Field Kit

25093

1 2 3 4

Inhaltsverzeichnis

Seite 1 - General Information

Seite 2 - Refer to Figure 4

Great Plains Mfg., Inc.2 Grease Bank151-125M 09/25/2006InstallationRefer to Figure 2.1. Remove the right forward seed box mounting bolt ➉.Save the was

Seite 3 - Refer to Figure 7

Great Plains Mfg., Inc.Installation Instructions 309/25/2006 151-125MRefer to Figure 5.6. Starting at the Grease Bank, pull one end of thenylon tubing

Seite 4 - Parts List

Great Plains Mfg., Inc.4 Grease Bank151-125M 09/25/2006Refer to Figure 8.12. Fill each position with grease, checking for leaks.Add grease until exces